Roland Xps 30 Version 2.11 Instant

: Dedicated mode for controlling recording software directly from the keyboard interface. Roland - Global Support & Resources

| Issue | Potential Causes and Solutions | | :--- | :--- | | | Check AC adaptor connection to both the outlet and the XPS-30. If using batteries, ensure the AC adaptor is disconnected. If batteries are installed and the power cord is disconnected while the unit is on, the power will turn off. | | No sound | Check amp/speaker power, master volume knob, and Local Switch setting (should be ON). If sound is heard through headphones, the problem may be with the cables or amp/mixer. | | Microphone sound is not output | Check the rear panel [MIC LEVEL] knob and the MIC IN LEVEL slider. The XPS-30 does not support condenser microphones without phantom power. | | Specific Part does not sound | Check the part volume level and the [LEVEL] sliders. Ensure the part is not muted and the tone switch is "ON". | | Notes do not stop | Check the "Control Pedal Polarity" or "Hold Pedal Polarity" in the PEDAL system settings. The pedal polarity may be reversed. | | "MIDI Buffer Full!" error | An unusually large amount of MIDI data was received. Reduce the amount of MIDI messages being transmitted to the XPS-30. | | "Incorrect File!" error | The XPS-30 is unable to play or import the file. Check the file format (must be 16-bit linear WAV, 44.1 kHz) and that the filename follows the correct conventions. | roland xps 30 version 2.11

Fixes rare system freezes that could occur when triggering heavy multi-samples or rapidly switching Patches/Performances during live sets. : Dedicated mode for controlling recording software directly