Strands S68 Drill Press Manual !link!

| Interval | Action | | :--- | :--- | | | Wipe down table and column. Remove chips from T-slots. | | Weekly | Oil the quill splines (3 drops of ISO 32). Oil the table rack & pinion. | | Monthly | Check belt tension (15mm deflection with thumb pressure). | | Yearly | Change gearbox oil (1 liter of SAE 30 non-detergent). Grease motor bearings. |

The Strands S68 standard configuration requires a 3-phase power supply (typically 230V or 460V). Strands S68 Drill Press Manual

A: Yes. Look for a small thumb screw on the left side of the head, just above the depth stop. This locks the quill for changing bits. | Interval | Action | | :--- |

Use a crane or forklift with proper rigging straps rated for at least 500 kg. Oil the table rack & pinion

Wipe down the column and ground table surface with a light rust-preventative oil (such as WD-40 or generic machine oil).