Alcor Mp 200717 Jun 2026

: Reinstalls or updates the firmware on the flash controller when the drive is no longer recognized by the OS ("No Media" or "0 bytes" errors).

: The software window should update automatically, mapping the device into one of its status matrix slots. alcor mp 200717

The version specifically targets the following Alcor Micro controller models: AU6989SN-GTC AU6989SN-GTD AU6989SN-GTE AU6989SN-TA How to Use the Tool : Reinstalls or updates the firmware on the

Before running the software, download a hardware analysis tool such as or Flash Drive Information Extractor . Plug in your drive and verify that the "Controller Vendor" reads Alcor Micro and the "Controller Part-Number" matches AU6989SN (or variants GTC/GTD/GTE/TA). Step 2: Prepare Your Environment Plug in your drive and verify that the

AlcorMP 20.07.17 is a specialized Mass Production Tool designed for repairing and flashing firmware on USB drives using Alcor Micro controllers. Released in July 2020, it is utilized to restore, repartition, and remove write protection from "dead" or corrupted flash drives, effectively wiping data in the process. For more details, visit

If the auto-detection fails, you may need to look up your specific NAND chip ID (found via ChipGenius) and manually select it within the AlcorMP setup window. Conclusion

Once the process is complete (the progress bar will indicate "OK"), close the Alcor MP application. You physically remove and then re-insert the USB drive for Windows to recognize the new partitions and file system. The drive should now appear in "This PC" with the correct capacity and be ready for normal use.