Follow these instructions carefully to safely flash your FirstChip drive. Step 1: Verify Your Controller Chip (Mandatory)
: Run FCMpTools.exe . If the interface is in Chinese, look for the Language section in the right-hand column and select English .
When a flash drive becomes corrupted, shows "0 bytes" capacity, becomes "Write Protected," or needs to be restored to factory settings, standard formatting tools (like Windows Disk Management) often fail. This is where MPTools (Mass Production Tools) are required.
Verify the readout specifically returns either or FirstChip FC1179 . Step 2: Configure and Launch MpTools V1.0.5.2 Download the FirstChip MpTools V1.0.5.2 package archive.
High-level modifications, partition structural adjustments, and quick serialization. Recovers severely corrupted "Dead" or "No Media" drives.
Before opening MPTools, you must confirm your drive actually uses the FC1178 or FC1179 controller. Using the wrong tool can permanently brick your device.
Click the flashing icon located on the right control column.
: Scans individual NAND pages, maps defective sectors, and excludes them from the usable partition to prevent data corruption.
